trying to get 308 back on the road anyone know where this vacuum hose connects?
need to clean up head bolt holes on a block anyone know the tap size?
whats the torque spec on the rockers for the tta heads?
time for the dreaded head gasket replacement. quick question on the TTA can i pull engine but itself or is it easier with trans attached?
anyone have any trick for getting this thing in and out its driving me nuts.
gonna hit junkyard this weekend looking for a set of valve covers to powdercoat. what gm cars use the same covers as TTA's?
so i ordered the crown replacement antenna for my car got it mounted in the fender and routed wiring then i go to connected the wiring harness...
anyone have a source for the rubber seals that go under the acorn nuts for the valve covers?
just finished the rebuild on the front suspension, used all gm parts for steering linkage went with the del a lum control arm bushings and qa1...
looking for a passenger side valve cover if anyone has one they'll part with.
cleaning up car today and notice my power antenna mast is missing whats a good source for a replacement?
been looking for new brake hoses and found all but the center one in back, anyone know a source to pick this one up?
finally decide to start working on exhaust today and found three different pipe sizes between the downpipes and converter, hopefully i'll be done...
anyone have the hanger that goes from the trans mount to the converter? mine got chopped off when a new cat was installed at some point.
working on parts list to rebuild from end, using ac delco parts except upgrading bushings.
looking for a set of valve covers, let me know whats out there.
finally got my power logger working so wen to put the ecu back behind the dash today it was a pain but finally got it, next will be my modded...
Been need to clean my from wheels good, whats the best way to clean between the spokes without messing up the wheel finish? thanks for the help
anyone know of a source for mad pipes for our cars?
are the valves used in the tta heads the same as the on the fwd cars? looking at picking up a set to do some porting.
Separate names with a comma.