Turbo Trans Am Forum

Go Back   Turbo Trans Am Forum > Classifieds > Rate and recommend parts and or service providers
ALL NEW REGISTRY Register FAQ Members List Calendar vBGarage Search Today's Posts Mark Forums Read


Rate and recommend parts and or service providers This is the place to talk about your experiences with parts and or service providers you have dealt with personally. If they are good let us know! If they are not so good let us know as well but keep it clean please! If you have never dealt with any said vendor please do not start a flame war here! Only post if you have personally dealt with said parts and or service provider(s)!!

Reply
 
Thread Tools Display Modes
  #1  
Old 03-27-2010
BuickGN's Avatar
BuickGN BuickGN is online now
TTA# 130
User
 
Join Date: Nov 2005
Location: Massachusetts
Posts: 73
Rep Power: 0
BuickGN is an unknown quantity at this point
Moates Engineering APU1 AutoProm

Autopromthis unit is for anyone who likes to change settings on their chip. Settings can be done on the fly. It also can read your old chips to you can take a look at your old configurations. Will only burn the three chips that come with it. Comes with an ADL cable which you can hook up and read your cars datastream. You can also data log to check your performance after your change. This can all be done with the tuner Pro software that comes with it. If you purchased accessory Bluetooth module giving you everything wirelessly! Definitely a five-star product!
http://www.moates.net
__________________

Viktor Zimmerman
TTA 130
Reply With Quote
  #2  
Old 03-27-2010
Rodimus_Prime's Avatar
Rodimus_Prime Rodimus_Prime is offline
Senior Member
SuperUser
 
Join Date: Mar 2009
Location: Harrisburg, PA
Age: 29
Posts: 620
Rep Power: 64
Rodimus_Prime is on a distinguished road
Send a message via AIM to Rodimus_Prime Send a message via Yahoo to Rodimus_Prime
Re: Moates Engineering APU1 AutoProm

thats a bit beyond me

upon further reading it would appear we have a 24 pin chip which this device can only read, it cannot reprogram, so im not sure if its so useful/?
__________________

1989 Turbo Trans Am #82
2007 Cobalt SS G85, Harrop 1320LSJ 75MM, 298hp 254tq

Last edited by Rodimus_Prime; 03-27-2010 at 09:05 PM.
Reply With Quote
  #3  
Old 03-27-2010
BuickGN's Avatar
BuickGN BuickGN is online now
TTA# 130
User
 
Join Date: Nov 2005
Location: Massachusetts
Posts: 73
Rep Power: 0
BuickGN is an unknown quantity at this point
Re: Moates Engineering APU1 AutoProm

It stays in your car and the unit which has their emulation chip on holds your current configuration. So it can just act like your EEPROM. If you're one that likes to do your own tuning you can make many changes on-the-fly without having to burn a chip every time which takes a lot of time and effort. It also reads the ALDL port and can take the place of turbolink which was a old software program to read your ALDL port for current data. You can also data log with it. If all this is over your head I can see why it would be useless to you. But I love it. If you have the fast xfi then you would not get this. This is more for people who are also keeping their car stock and don't need an expensive racing computer.
__________________

Viktor Zimmerman
TTA 130
Reply With Quote
  #4  
Old 03-28-2010
Rodimus_Prime's Avatar
Rodimus_Prime Rodimus_Prime is offline
Senior Member
SuperUser
 
Join Date: Mar 2009
Location: Harrisburg, PA
Age: 29
Posts: 620
Rep Power: 64
Rodimus_Prime is on a distinguished road
Send a message via AIM to Rodimus_Prime Send a message via Yahoo to Rodimus_Prime
Re: Moates Engineering APU1 AutoProm

I do my own tuning on my OBD2 cars but thats taken some time to learn. I did read that you can modify your ECM case to accept the 28pin plug and you can even get an adapter to program 28 pin chips and use those and burn them.

Only problem is having the ability to read and burn doesnt really mean that you should or will know how to and thats the part that scares me off. Its def interesting tech but I also wonder does it allow you to run off a wideband rather than just log it. I want some sort of computer that runs the car off a wideband as the powerlogger does or as Fast XFI does.

Running off the wideband is what really delivers the precision, makes the best power and allows for the crazy high mpg that some get.
__________________

1989 Turbo Trans Am #82
2007 Cobalt SS G85, Harrop 1320LSJ 75MM, 298hp 254tq
Reply With Quote
  #5  
Old 03-28-2010
BuickGN's Avatar
BuickGN BuickGN is online now
TTA# 130
User
 
Join Date: Nov 2005
Location: Massachusetts
Posts: 73
Rep Power: 0
BuickGN is an unknown quantity at this point
Re: Moates Engineering APU1 AutoProm

That's something you would have to call them and ask. This is great for me who likes to just tweaking little bit. I'm still running stock everything he so just trying different little things here and there. This setup is perfect for that.
__________________

Viktor Zimmerman
TTA 130
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:34 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
2000 - 2010 TurboTransAm.com