High boost.

[1bad89]

I have pretty much all the mods you can do for this motor,Externaly, drive train is built with a 3000 coan torque converter, modified 700r4 and , 3.7posilock gear. I have alky and a 25 psi Chip from aggressive performance. New PTE turbo charger adjusted for high boost and a external dial in hallman waste gate. Frame connectors, up graded fuel system and 2 boost gages among other things, mix my fuel of course. More mods but not worth mentioning. I am concerned about the push rods, valves, etc. I've heard the tta motor can withstand a lot. I don't want to push that issue. Was just wondering if a 25 psi Chip could hit 27psi. Cause it happed to me a couple times this summer. I know I'm pressing my luck. Just don't know if these chips are totally accurate.

 

[TTA_PACE_CAR]

Just make sure you’re running the correct octane fuel for the chip and that you’re not getting any KR at high rpms.

 

[1bad89]

Yeah I mix my fuel and have alky spraying. Never been to the track, but it's crazy how much pull you have over 20psi. Seems like a whole new world opens up, as long as you don't blow anything up. LOL.

 

[TTA_PACE_CAR]

I also have a GN and changing out the intercooler to a large front mount produced incredible gains. It’s too bad space is so limited in the TTA.