So, was doing an oil change. And mindlessly unscrewing the filter I didn't realize the entire oil cooler was coming with it, somehow... I decided it was a good chance to just pull the whole thing off which I did. I see that there's a c clip on the inside which wasn't attached to anything although I assume it holds down the threaded pipe that holds it together, can anybody confirm my suspicion? Also I'd like to replace the gasket on the engine side of the unit, is this a generic part or is it something I will have to special order?
TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Oil cooler C clip and gasket
- Thread starter Benny04
- Start date
DynoDave
Well-Known Member
Interesting question.
I'll post these until more definitive answers come along. As a non-TTA owner, I don't have a lot of V6 info. The parts book view is for the '91-'92 KC4 (engine oil cooler). Doesn't seem to show a clip.
The actual photograph is of a KC4 cooler, and clearly shows a clip in place.
I'll post these until more definitive answers come along. As a non-TTA owner, I don't have a lot of V6 info. The parts book view is for the '91-'92 KC4 (engine oil cooler). Doesn't seem to show a clip.
The actual photograph is of a KC4 cooler, and clearly shows a clip in place.
Dynodave, I see a clip on there. Answers my question exactly. Much appreciated.Interesting question.
I'll post these until more definitive answers come along. As a non-TTA owner, I don't have a lot of V6 info. The parts book view is for the '91-'92 KC4 (engine oil cooler). Doesn't seem to show a clip.
The actual photograph is of a KC4 cooler, and clearly shows a clip in place.
