Turbo T/A 1989 EXAUST GASKETS

[wnicholl]

Hello in All in Turbo Land,

Looking for a part number for the the exaust manifold gaskets, OEM or Aftermarket. Had three diferent sets sent to the shop none will work, so I don't know if anyone has, insite on this. Again Thank you in advance Again!!!

Bill
Westmoreland NY​

 

[72firebird]

Hello in All in Turbo Land,

Looking for a part number for the the exaust manifold gaskets, OEM or Aftermarket. Had three diferent sets sent to the shop none will work, so I don't know if anyone has, insite on this. Again Thank you in advance Again!!!

Bill
Westmoreland NY​

they didn't come with any on the car originally. I think most people use the high temp copper silicone if I remember right.

 

[Jan Larsson]

Bill be aware these cars did not have a exhaust manifold gasket from the factory .... depending on your driving habits some opt to just make sure the surfaces are flat and no gasket some (like me) use the Felpro gasket for the 3.0 heads .... don't have the part number handy but Autozone, Kragen etc do list them for our application (probably under GTA SE just make sure it's out engine)

 

[wnicholl]

Again many thanks
this is a great site!!!!!:thumbup:

 

[TTA850]

Fel Pro MS93046

I use them on my GTA and as long as I make sure to retighten them once or twice after a warming the car up they last no problems.

HTH,
Steve

 

[wnicholl]

Thank you!

 

[El Dee Bee]

Fel Pro MS93046

I use them on my GTA and as long as I make sure to retighten them once or twice after a warming the car up they last no problems.

HTH,
Steve

That's a V-8. what good would that do ? There's not a V-6 on the GTA, is there ?

 

[TTA850]

That's a V-8. what good would that do ? There's not a V-6 on the GTA, is there ?

Well technically all 20th Anniversary Trans Am's are GTA's scince they must carry the Y84 option code before they could have gotten the Y82 option - but here's a pic of my GTA

 

[wnicholl]

Very Very COOL!!!!!

 

[wnicholl]

Excellent Thanks