What's new
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Got a stock turbo tweak chip my boost in red?

Ryan40601

Well-Known Member
Just installed a turbo tweak stock chip in my TTA
My boost gauge seems to go into the red zone !
I cant tell if its detonating i dont have a scan tool , my boost prior to install was up at 18-19 if anyone can assist give me a buzz!
Thanks
 
You are definitely knocking @ 18/19# in 3rd gear.

You really need a scantool. Order a scanmaster from full throttle speed before u blow it up.

Turn it down to 15# till you get a scanmaster.

Joe
 
How do i turn it down?

Adjustable wastegate

Product number on this page: ACT-STD
Buick Grand National, Turbochargers & Related Parts | Cotton's Performance Buick Grand National Parts & Service

actuator.jpg
 
You are definitely knocking @ 18/19# in 3rd gear.

You really need a scantool. Order a scanmaster from full throttle speed before u blow it up.

Turn it down to 15# till you get a scanmaster.

Joe

I agree, turn the boost down and get a scanmaster. You don't want to blow a headgasket or do other damage to the motor from knock from todays bad gas. Here is a pic of a blown headgasket, not a good thing!!!
 
Nobody should be relying on the factory boost gauge...they are notoriously inaccurate.
....
 
I guess the scan master will tell me what's going on inside ? I hate to sound stupid but the whole turbo thing is very strange and I'm having a hard time grasping it! Thanks for the input !
 
I guess the scan master will tell me what's going on inside ? I hate to sound stupid but the whole turbo thing is very strange and I'm having a hard time grasping it! Thanks for the input !
Stay out of it period untill you hear from someone on the forum Got it ? it may be a good lesson to replace the H.G if you want a real good understanting of how the motor works keeep pushing it without a S.M .Stop, look and read , there is a ton of info here....:whistle: i'm sure when you look at everything you will be impressed :dance: just like i was, this site rocks ttarider
 
Thank you I will definitely take your advice , and I will get the scanmaster is there a particular model to look for?
 
Until you get handle on the tuning of your car. You can run a hose from the turbo straight to the wastegate and that should give you about 12 psi of boost. This will let you drive the car but stay out of any boost that would cause damage. This old school gn trick has helped many drive their car while working out problems such as fuel pressure, vaccuum leaks, weak coil pack, ignition module, exhaust related knock, etc. Good luck.
 
Hi Ryan. Where on Li Are you Manorville ? I'm in farmingville maybe I can help you. My name is Frank.
 
Back
Top