TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Build Number
- Thread starter BuickGN
- Start date
Well post the vin if you like we have some guys who have a good idea of the cars and car numbers and should post for you or try PHS.. http://www.phs-online.com/ Once you find out don't forget to send your info into Chris and have him add your TTA to our registry!
Could it be 139 as in your signature?
Vik,
If we're talking about the car I sold you then the number is #130. If you like you can contact PHS but trust me when I say it's #130. Is there a reason why you think it is #139?
If we're talking about the car I sold you then the number is #130. If you like you can contact PHS but trust me when I say it's #130. Is there a reason why you think it is #139?
BuickGN
TTA# 130
So is this another Turbo Trans Am other than the one I sold you? If you want send me or post the last six digits of the VIN and we can clear this up.
The build number is not necissarily in sequence wiht the VIN number.
Looking at the list again,no where did I see a build number out of sequence with a vin number. :eam:
TTA 1077
Well-Known Member
Jan, Yours and mine are in sequence!
Just what I've been told, without all the 1550 VIN numbers and build numbers it's hard to say either or I guess ...
Jan,
From what I've seen and learned over the years the VIN numbers are sequentially aligned with the build numbers. That is the only way to actually determine the build numbers since there was no other documentation that said "this VIN = build #____". If you know what the last six digits of the VIN are that will give you either a range for the build number or in some cases an exact number. I'm assuming PHS has all the VINs so this is how they come up with the build numbers.
FYI, there were some VINs that were numerically sequential (meaning the VINs were numerically in order). These cars were chosen in order from the assembly line at Pontiac and ended up as TTAs. From what I recall there were several instances where 3-4 VINs were in exact order.
:cheers:
From what I've seen and learned over the years the VIN numbers are sequentially aligned with the build numbers. That is the only way to actually determine the build numbers since there was no other documentation that said "this VIN = build #____". If you know what the last six digits of the VIN are that will give you either a range for the build number or in some cases an exact number. I'm assuming PHS has all the VINs so this is how they come up with the build numbers.
FYI, there were some VINs that were numerically sequential (meaning the VINs were numerically in order). These cars were chosen in order from the assembly line at Pontiac and ended up as TTAs. From what I recall there were several instances where 3-4 VINs were in exact order.
:cheers:
