What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

First Turbo 6 - Tta

J

JDS TTA

Active Member
Hey Everyone,
Recently was able to pick up a TTA , I believe it is #249. Look forward to detailing it and making it run great. Goal is to have a nice driver that can run low 12 on occasion.
Cheers!
 
Oh yes congrats and welcome to the club. These cars are addictive (ask any Rob) and very fast with mods. I have bought five if them and still have three. You will love it!
 
Thanks for great Welcome guys. I don't got any pics at the moment. Over the winter I am going to do a "spring cleaning" . I suspect that trans work has been done, so going to have a look at what converter is in there, and check if there is a chip in the car.
I will start another thread about the progress. Cheers!
 
Just put a order in for a TT chip, scanmaster, 60lb injectors, emmision chip ( just incase to pass etest where I am) also splurged on a Powerlogger.
Need to order my hotwire/fuel pump kit . I also picked up Alky kit from a member, but don't plan to install it this season. I want to spend this season learning about the car and tuning.
I also plan to do exhaust, but was wondering what you guys do for high flow cat? not really wanting to go with a test pipe.
 
Thanks for the reminder about the hotwire kit,noticed Racetronix has a TTA specific kit.

Do any of you run a high flow cat?
 
'88 and newer get etested here in Ontario.
I also have a GTA , I have a magnaflow high flow cat, perhaps that would work? just cap off the air tube.

Also, what are most of you guys doing with PCV pipe on the driver side valve cover? Mine doesn't seam to want to stay in place? I tried to search pictures on the site but they no longer show....must of been moved or removed.
 
You must log in or register to reply here.
Back
Top