What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

HotWire Kit

TTAGUY

TTAGUY

Well-Known Member
Got a quick question for hotwire install. Easy kit to install, but the directions say remove nut from bolt at tank strap, I'm sure this is for a GN, as our bolts are vertical, so if I remove it tank will come down, directions say don't drop tank. I understand everything else, its a piece of cake.

Here is the part # of the kit and a couple of pics.
# FPWH-006

View attachment 4156

View attachment 4157

Any pics anybody can share of where they grounded, and set the relay would be great.
Thanks,
Marcel
 
this is a TTA hotwire kit an not a GN right ? just making sure they are diffrent ... im looking at my hot wire kit for a tta its part # is FPWH-012 from race tronics
 
tta299 said:
this is a TTA hotwire kit an not a GN right ? just making sure they are diffrent ... im looking at my hot wire kit for a tta its part # is FPWH-012 from race tronics
Click to expand...


Thanks tta299, Eric sent me the wrong kit, and G-Body sent me the wrong breather, dang it.
 
tta299 said:
this is a TTA hotwire kit an not a GN right ? just making sure they are diffrent ... im looking at my hot wire kit for a tta its part # is FPWH-012 from race tronics
Click to expand...
Just dug mine out of the closet that i bought for #308 and never installed, same #012, sorry dude , Eric don't make many mistakes for what it's worth
 
robert lee said:
Just dug mine out of the closet that i bought for #308 and never installed, same #012, sorry dude , Eric don't make many mistakes for what it's worth
Click to expand...

The one with the 12 is the correct one. I got mine from Racetronix .:burnrubber:
 
TTAGUY said:
Wonder how come the vendors didnt know this, I know mistakes happen though, just sucks for me.
Click to expand...


I didn't even get the breather from the normal vendors. I did a search and got the correct part # and I got it from a speed shop I think in NJ. But it was the correct one.
 
TTA984 said:
I didn't even get the breather from the normal vendors. I did a search and got the correct part # and I got it from a speed shop I think in NJ. But it was the correct one.
Click to expand...


I should've done the same, Mike. Well anyways tomorrow the phone calls I wonder how their going to pay for the return shipping? But I will be getting some more stuff from TT.
 
After looking at pic 1 and 2. I see the hose that is plugged off with a bolt. If that is the hose coming off the stock turbo inlet bell, I would probably plug it off at the inlet bell itself. Mine when it had the stock turbo was plugged there, here is a pic.
 
TTA984 said:
After looking at pic 1 and 2. I see the hose that is plugged off with a bolt. If that is the hose coming off the stock turbo inlet bell, I would probably plug it off at the inlet bell itself. Mine when it had the stock turbo was plugged there, here is a pic.
Click to expand...

Hey Mike, the inlet bell is plugged at it, heres a pic.
View attachment 4242

The hose that is plugged there starts at the vac block goes to a check vavle and ro the canister, that is a T that is blocked. Matbe for a boost/vac gauge? Here is a pic.
View attachment 4243
 
You must log in or register to reply here.
Back
Top