What's new
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Parts Made

Ozpont

Active Member
Hi . its been a while.. but still alive and paying tax..
Thought I'd mention a couple of parts subjects...its NOT an advert.... just being part of the community etc..
Have made the TA, TTA, GTA electric mirror switch perfectly. (and other design Camaro ones too).. have the carpet edge sill molds for the GTA TTA color done a while back.. Things that are not perfect get destroyed...
About to come out is the seat runner end cap sets.. in 7 colors including the Beechwood needed for the GTA TA series, supplied in full new kit of 8...
Have something very big in the pipeline that most every '89 TTA owner will want .. should be out in about 3 months.
Still got my TTA in Australia.... if anybody gets down that way (Sydney) look us up . we can go out for a drive if I'm in town .. on the wrong side of the road.
 
Last edited:
"what's up with the hammer in the bucket with all the emblems?"
.. we had an issue with a finished production of about 100 or so.. but the pins on the back were a good 1/4 inch out of correct location..so best to destroy them. Did the same with a 2000 Camaro emblems recently.. .. prefer to do that then have crook ones out there.
 
"what's up with the hammer in the bucket with all the emblems?"
.. we had an issue with a finished production of about 100 or so.. but the pins on the back were a good 1/4 inch out of correct location..so best to destroy them. Did the same with a 2000 Camaro emblems recently.. .. prefer to do that then have crook ones out there.
Ah I see. I bet there are still folks that would buy them if you make sure they know they were incorrect, things like that are nice to put in the garage or add to something they are building. At least get some of your investment back.
 
Back
Top