What's new
By:
TurboTransAm.com

Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Stock Engine Pics

kidsixpack

kidsixpack

Silver Member
I was changing the oil in the TTA today and one of the breathers on the valve cover attached to a hose is leaking to the point of really messing up the idle. It's up down and all over the place. My engine although not modded has a lot added under the hood. I'm looking for what is supposed to be there. I'll post a pic.
KID
 
Last edited:
The breather in question is located at the back of the driver side valve cover. I'm not sure if it's stock or not?
KID
 
If you are talking about it being a vac leak that breather is not the source, need a close-up pic of what you are talking about.
 
The funny thing is I posted this as soon as I ran into an issue. I ran out for a minute and realize that what I was asking wasn't making any sense LOL I'll get a picture of what I've got when I get a minute.
KID
 
kidsixpack said:
The breather in question is located at the back of the driver side valve cover. I'm not sure if it's stock or not?
KID
Click to expand...
Not Stock.
From the Valve Cover, 90 Degree Grommet, Metal Tube, Straight Rubber Hose, Inlet Bell...With Two Clamps On The Straight Hose (Not Shown)....20171001_124250.jpg 20171001_124307.jpg 20171001_124350.jpg
 
Great pics! I can see some things that have been modded on my car. I'll need to replace the filter that broke on my car. You are correct about the piece in question.
Thanks for posting.
KID
 
IMAG2205.jpg IMAG2206.jpg Hey kid, you do have some mods, they might be simple but are worthwhile. That's one of the first things I did when I started modding my car. Cap the inlet port and put a breather on the valve cover. You might have more mods than you think on that motor. Maybe even a throttle body bypass so the fuel goes in cooler. Never know , lol. 12.5's you said. Not a bad number if you want my opinion. Here's a pic of my cap and breather....
 
I have 2 extra factory pieces/pipes that are pictured above on the dryer photo. I bought them as replacements many years ago when I was modding my car. I recently found them in storage and would sell them to you if you are wanting to go back to stock/original. I'll likely post them here in a few weeks for sale when I have time anyway.
 
You must log in or register to reply here.
Back
Top