Trans cooler line routing

[dklumpp]

What is the correct routing for the cooler lines. I don't have any in the car so need to Fab them just don't know how they rout to the radiator ie: driver's side, over/under cradle, etc. Any pictures would be helpful as well. Thanks!

 

[Jan Larsson]

CLassicTube.com have them reproduced and are 100% correct, I got the stainless steel set on mine. Here's pictures of the lines (not they are bent for shipping) … I'll post pictures of the routing once I find pictures I took of mine after the ss lines where installed.

The route behind the flywheel cover to the driver side then along the oil pan to the front over to the radiator.

 

[Jan Larsson]

These lines will not be easy to bend correctly as OEM

 

[Jan Larsson]

during install (not I rebuild engine at the time so put lines in first then dropped down the engine before re-installing my transmisson

 

[Jan Larsson]

And some wider shots that will help

 

[dklumpp]

Thanks so much! I checked with inline and they didn't make any so glad that classic does! Im thinking I'll get the standard lines instead of stainless as I just ran the stainless fuel lines this weekend and was a big pain! Also, I just installed the engine and transmission so hopefully I can get the lines in!

 

[dklumpp]

View attachment IMG_20191104_070103306.jpg#799 finally gets a motor!

 

[Jc68fbody]

When looking at classic tube did you just order the lines for a 700r4 ? I don’t see a 200r mentioned.

 

[Jan Larsson]

When looking at classic tube did you just order the lines for a 700r4 ? I don’t see a 200r mentioned.

You will have to call them. They should still have the pattern for the 200r lines

700r4 lines are totally different.

 

[Jc68fbody]

Thank you . I did a search for 200r 4 , I was able to order a set . Thank you for the info .