Can someone please measure the Length and Width of your PAS sticker, Tire Pressure Sticker, and Theft deterrent stickers (pass door, hood, rear hatch, etc). My car is being EDP dipped, so I no longer have anything to measure. I took pictures, but the company that can reproduce these for me needs the sticker sizes....I never thought to measure them.
TurboTransAm.com
Register today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
VIN Labels
- Thread starter fast400
- Start date
V6UnderPressure
Active Member
I am looking for the PAS stickers that go on the underside of the hood. When I had the hood resprayed i told the shop to leave them on but of course they had removed them.
Classic Industries had them last time I looked ... even the GM parts dealers might still be able to get them if you ask them.
GM part number is 12396790 still shows up in GM online search engines @ $14.78
Classic Industries Part Number DT796 and they list them still for $10.99 .....
Last edited:
These should be to scale ... hard work reproducing these and about 20 other stickers for our cars about 4 or 5 years ago ... luckily I got 2 sets for mine at the time ...
If you need any others let me know ...
Oh for the VIN stickers note that the 33VKE you see in these samples where all different and a range of numbers/letters different for each car so I hope you got your originals so you can get them all done correctly (so all 9 or so are different but with the same VIN on them); I think I posted a thread about it when I had these done if you do a search you should find it.
And all these should be done, if properly done and legaly done, on the 3M "tamper indicating" material ... when I did my stuff I just used normal vinyl film.
Attachments
The March 2012 issue of High Performance Pontiac shows an add for a place called ECS Automotive Concepts that makes the GM Vin decal from 1970-2009 Pontiacs.
It says that they are the only company that is licensed by GM to do this.
It is the car's original driver doorframe vin label.
They may be able to do others.
This was listed in the ad:
ECS Automotive Concepts
(855)532-7846
http://www.ecsautomotive.com (vintage)
http://www.ecsvin.com (late model)
Just giving a head's up,
George :beach:
It says that they are the only company that is licensed by GM to do this.
It is the car's original driver doorframe vin label.
They may be able to do others.
This was listed in the ad:
ECS Automotive Concepts
(855)532-7846
http://www.ecsautomotive.com (vintage)
http://www.ecsvin.com (late model)
Just giving a head's up,
George :beach:
kymmee
Silver Member
Thanks George for this info. The labels for newer models (73 and up) are a bit pricey IMO. The VIN cert label is $124.95 and the tire load label is $79.95. The older models are $49.00
Getting the MSE a panel off repaint soon and thought I might get new labels but the price is too much. Will try and salvage the orig.
Getting the MSE a panel off repaint soon and thought I might get new labels but the price is too much. Will try and salvage the orig.
I didn't check out the prices.
But they do seem alittle high.
I have removed quite a few vin labels, and stuck them back on, there is always a section that doesn't stick well, and keeps coming up.
George :beach:
But they do seem alittle high.
I have removed quite a few vin labels, and stuck them back on, there is always a section that doesn't stick well, and keeps coming up.
George :beach:
